Out With The Old

As many of you know we currently inhabit a rental home.  It’s huge at nearly 3200sf.  It backs to open space.  We love the floor plan.  Every child has their own room.  The neighbors are incredibly nice and bring me coupons and leave free furniture on the curb.  *giggle*

But … there is always a but isn’t there?  This house is outdated.  It’s a nice home.  Structurally it’s sound.  But it was built in the early 90’s and the cabinets are old and all the wood trim in the house is old needs to be sanded down and re-stained or in my opinion painted white. 

The homeowner is a super nice Asian man.  He wants the house to be updated but for pennies on the dollar which is difficult even when you are as thrifty as I am.  He also doesn’t have any vision.  He doesn’t have an eye for what is in right now.  He doesn’t understand the processes of home construction when we talk to him about projects.  It’s a cultural barrier that is difficult to cross.

So we have both decided that I will only make changes that can be un-done when I leave if he doesn’t like them.  Paint, fixtures etc..

Here is the latest change we made and let me tell you something,  a single chandelier can make a home feel so much richer in style!

Our entry is two stories tall. This is from the landing on the stairs.

  Obviously we will be getting some bulbs that are smaller to fit in there.  This sucker takes 11 bulbs!  And they only had the multi packs in 60 watt so imagine how bright this things is lol.  Here is from the upstairs.

Let me tell you how fun it was to watch Mr. Garden straddling the railing and the 24ft ladder up there.  While I stayed on the inside of the loft railing with a board reaching across to another ladder so we could support the 75lb chandelier!!!  I think my butthole puckered a few times.

Oh and here is what we left behind.

Much improved… yes?

~Sommer

Electrical 101

How to re-wire your dryer in 10 easy steps...  So one of the first projects you may get into when moving into a new home could end up being more out of necessity than desire.  In this case, a new dryer connection.  We realized after moving in that the cord on our dryer was a 4 prong and the outlet was only a 3. 

Can you say round hole, square peg?  After a bit of research we understand that more modern appliances are 4 prong conductors.  Two hot wires, a neutral and a ground. This is safer because the current carrying neutral is not connected to the dryer case. But when you live in an older home you most likely will find that the wall receptacle will not have a ground slot.  Leaving you with only three slots instead of four.

So in this case we have to convert the four wire dryer to a three wire set up.  Don't worry, I only got electrocuted once.  Joking, joking... lol. 

1. Verify the electrical requirements of the dryer... typically in the US will be 240 volts.

2.  Make sure the receptacle in the wall has the same rating and note the number of slots, either 3 or 4.

3.  You'll need to buy a new cord to coincide with the wall receptacle.  If it has three slots you will need one with three prongs.

4.  To change your electric dryer power cord from a 4-wire to a 3-wire you first need to disconnect the old dryer cord. To do this make sure your dryer is unplugged and open the access panel cover on the back of the dryer.

5.  Once the cover is off you will see a terminal block with three wires. Black on one side (HOT), white in the middle (NEUTRAL) and red on the other side (HOT).  The green is your GROUND wire so you don't get electrocuted!  Use a 3/8″ nut driver to remove the nuts or a phillips screwdriver to remove the bolts (depending on your dryer) and remove each dryer cord wire from the terminal block. When you remove the nuts or bolts, be careful not to drop them down into your dryer!

6.  Now this is going to get interesting so bear with me... Since the new three wire connection has no ground wire your neutral conductor will have to serve as neutral and ground.  This means you'll have to create a jumper conductor from the neutral terminal to the dryer’s framer.  Also known as a ground strap.  The bonding jumper is either a metallic strap or a green wire that is connected between your dryer’s neutral (white wire) terminal and the green ground screw connected to your dryer’s frame.

New 3 wire cord (no ground wire)

Installing this bonding jumper is an extremely important step when changing from a 4-wire to a 3-wire power cord to prevent electrical shocks when touching anything metallic on your dryer.



Bonding strap




















If you don't have the original bonding strap, you can make one. You need a short piece of green 10 AWG wire, 2 ring terminals, a pair of wire strippers and a pair of crimpers. Strip both ends of the green 10 AWG wire and crimp one ring terminal onto each end of the wire. Now connect one end of the wire to the neutral (center) terminal and the other end to the dryer’s frame; where your ground is connected now.


Tools to make your own bonding jumper with green wire.  This can be used from the old 4 wire cord.

























New wiring.  The green jumper shares the spot with the neutral
conductor and also mounts to the unit itself.





















7.  Now you will insert the new 3 prong cord through the connector and secure but don't over tighten. 

8.  Hook up the new 3 wire cord  and connect each wire to the dryers terminal block.  Remember the two outer wires are HOT and the center wire is NEUTRAL.

9.  Replace the terminal panel cover.

10. Plug in and have a margarita to celebrate a job well done while the laundry is drying!

I've linked up to these parties.

~Sommer